subtractive mixing – why not RGB?

In a previous post I spoke about the difference between additive and subtractive mixing and why the additive primaries are red, green and blue or RGB for short – http://colourware.wordpress.com/2009/07/13/additive-colour-mixing/

The chromaticity diagram – see http://colourware.wordpress.com/2009/09/28/colourchat-audiovisual-guide-to-the-chromaticity-diagram/ – has a very useful property. If you plot the chromaticities of two lights, then the straight line that joins the two points on the chromaticity diagram show you the additive mixtures that can be obtained by mixing together the two lights. If we take three lights, then the additive mixtures that can be obtained are defined by the triangle that is formed if the chromaticities are the vertices of the triangle. Ok – that’s a bit of a mouthful so let’s have a practical example. The triangle in the diagram below shows the gamut that can be achieved when we have three additive primaries that are positioned at the corners of the triangle.

rgb_gamut

 From this diagram it should become obvious why the additive primaries are RGB. Say, we chose, two reds and a cyan as the three additive primaries – well, the triangle would be tiny. In other words, the gamut would not be very big. The biggest triangle in the chromaticity is one whose vertices are formed by a red, a green and a blue. WhichRGB will give the biggest triangle? I don’t know – it’s been something that has been puzzling me for the last few days and I’ll come back to this in a later post. But certainly any RGB triangle is pretty large as long as the red, green and blue primaries chosen are reasonably saturated.

So what happens if we choose RGB as the subtractive primaries? Subtractive colour mixing describes how inks and paints mix together to form colours. The first thing to point out is that subtractive colour mixing is not additive and linear – you remember I said that when you mix two lights together the colour mixtures all fall on the straight line that joins the  two points in the chromaticity diagram that represent the two lights? Well, this is only true for additive colour mixing. So to work out the gamut for subtractive systems is not an easy thing to do. However, if you do select the three subtractive primaries as RGB you’ll get a gamut that looks something like this:

rgb_subgamut

Notice that the gamut is concave. Mixing red and green lights produces a nice yellow. You can test this by going into your colour-picker in software such as Photoshop or Powerpoint and setting the RGB values to be 255:255:0. You’ll get a nice yellow. But mixing red and green paints – it will give you a similar hue to yellow but you’ll get something quite desaurated; most likely you’ll get a brown. So using RGB as the subtractive primaries would not be a very good thing at all.

It turns out that additive and subtractive colour mixing are very related. The best subtractive primaries are the ones that control the amount of red, green and blue light reflected. A yellow dye applied to textiles, for example, mainly absorbs short wavelengths in the blue section of the spectrum, allowing the other wavelengths to be reflected by the textile. The “other wavelengths” that are reflected give yellow. But the important point is that the yellow dye absorbs blue. Similarly, a magenta dye absorbs green and a cyan dye absorbs red. This leads to the idea of the optimal subtractive primaries being those that are cyan, magenta and yellow or CMY. This leads to a gamut somewhat like this:

cmy_gamut

The biggest gamut for subtractive mixing is obtained by using CMY as the primaries. But weren’t you taught at school that the subtractive primaries are red, blue and yellow? Almost certainly you were – and this is because it is accepted dogma at most art colleges and in many art and design textbooks. But it is quite easy to show that the optimal primaries – those giving the largest gamut – are CMY not RBY. If you were building a colour-reproduction system using only three colours such as a printer you would come to the conclusion – as companies such as HP, Xerox, and Epson have done – that you get the largest colour range with CMY. So why has it become commonplace for artists to refer to red, yellow and blue as the primaries? Could it be a colour naming and language issue – that they really mean cyan when they say blue and it’s just a naming error. Possible, but not likely in my opinion.  I think it is more likely that most artists are not overly concerned that RYB gives a smaller gamut than CMY because they rarely restrict themselves to three primaries. An artist would typically use 6 or more primaries. For example, they might use two blues (one that is reddish and one that is greenish), two reds (one that is yellowish and one that is bluish) and two yellows (one that is greenish and one that is reddish) in order to easily be able to mix a wide range of colours. The (mis-)identification of RYB as the subtractive primaries has much to do with colour wheels. I like to keep each of these blog posts reasonably concise – if I start writing about the problems of colour wheels now I will be writing for another 2 hours. And it’s nearly midnight now so colour wheels will need to wait for another day!

6 thoughts on “subtractive mixing – why not RGB?

  1. This is fascinating…. I’ve never really thought about primaries before except for a tiny bit in physics class. Please do write about what’s wrong with color wheels, id love to know!

  2. CMY might be a better triplet than others, even though I still has to be proven.

    On the subtractive-mixing xy gamut you show here, we see that between Magenta & Yellow, the line is almost straight! meaning: the resulting colours are very close to an average of the two primaries – bad sign, primaries are not well chosen.
    It’s much much better between the cyan and the yellow: here we see a beautiful curve.
    However, any real wide gamut needs more than 3 primaries 😉

    A

  3. I think there is a lot of evidence that CMY is close to being the optimal set of subtractive primaries. One only has to look at what comanies such as HP and Canon use in their inkjet printers. These companies make a living out of selling great printers that can produce a good colour gamut.

    The drawings that I how are ilustrative – they are not meant to be scientifically correct representations. Essentially, they show that the gamut you get from RYB is small and the gamut you get from CMY is much bigger. They are not exactly what happens for any one set of CMY or RYB primaries but pretty close.

    Your comment about the straight line between Y and M does not make sense to me. Look at the straight lines between the RGB primaries in the additive diagram above.

  4. Sir.i am a painter.i am stil not clearified,To mix different paint colors,what are the equivalent subtractive primary colour to use among CYMK or RBY?

    1. Hi Anyanwu

      Not entirely sure what you mean, but I think if you mix together red, yellow and blue paints you won’t be able to mix as many colours as if you mix together cyan, magenta and yellow paints. Hope this helps.

Leave a Reply to Shea Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.