accurate colour on a smartphone or tablet

Electronic displays can vary in their characteristics. Although almost all are based on RGB, in fact the RGB primaries in the display can vary greatly from one manufacturer to another. Colour management is the process of making adjustments to an image so that colour fidelity will be preserved. In conventional displays – desktops and laptops – the way this is achieved is through ICC colour profiles. Colour profiles store information about the colours on a particular device that are produced by RGB values on that device. So to make a display profile you normally need to display some colours on the screen and measure the CIE XYZ values of those colours; you then have the RGB values you used and the XYZ values that resulted. The profiling software can use these corresponding RGB and XYZ values to build a colour profile so that the colour management engine knows how to adjust the RGB values of an image so that the colours are displayed properly. Building a profile often requires specialist colour measurement equipment – though this can often be quite inexpensive now. If you are using your desktop or laptop display and you have never built a profile then you are probably using the default profile that was provided when your display was shipped. The default profile will ensure some level of colour fidelity but particular settings (such as the colour temperature or the gamma) may not be adequately accounted for. If you want accurate colour then you should learn about colour profiling.

It all sounds simple except for the fact that ICC colour profiles are not supported by iOS or Android operating systems on mobile devices. I find this really surprising but that’s how it is for now. Maybe it will be different in the future.

This means that ensuring colour fidelity on a smartphone or tablet is not so straight forward. So what can you do?

Well, there are two commercial solutions to this problem that I am aware of. They are X-rite’s ColorTrue and Datacolor’s SpyderGallery. ColorTrue and SpyderGallery are apps that will use a colour profile and provide good colour fidelity. These are great solutions. Perhaps the only drawback is that the colour correction only applies to images that are viewed from within the app. Having said that, they allow your standard photo album photos to be accessed – but the correction would not apply, for example, to images viewed using your web browser. This is why a proper system implemented at the level of the operating system would be better, in my opinion.

There are two alternatives. The first would be to implement your own colour correction and modify the images offline before sending them to the device. This would not suit everyone – the average consumer who just wanted to look at their photos for example. But it is what I typically do here in the lab if I want to display some accurate colour images on a tablet. But if you were a company and you wanted to display images of some products for example – it might be a reasonable approach. It has the advantage that the colour correction will work when viewed in any app on the device because the colour correction has been applied at the image level rather than the app level. But it does mean you need to do this separately for each device and keep track of which images are paired to each device. This is ok if you have one or a small number of devices but maybe not so good if you have hundreds of devices.

The second alternative would be to build your own app. If you want to do things with your images that you cannot do in ColorTrue or SpyderGallery or if you have lots of devices and you can’t be bothered to manually convert the images for each device, then you could install your own app that implements a colour profile and then does whatever else you want it to do.

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.